KTM 500EXC Ultra Light Adventure Motorcycle Build – Phase One
KTM 500EXC Ultra Light Adventure Bike Build - Phase 1
- Various metric sockets and metric Allen bits
- Torque wrench
- Bike stand
Phase one of this Ultra Light adventure bike build is focused on fixing some of the issues that the 2017 KTM 500EXC has from the factory including suspension, tires, gearing, and protection.
Phase two will focus on on adding actually “Adventurizing” the bike with a Nomadlighting/tower solution, Mosko Reckless 40 rackless luggage, and an IMS 4.5 gallon tank.
Recent Bike Build Posts/Videos
Difficulty: 1/5Hello to all of our followers and fellow riders! New project alert! Today we’re going to be discussing the most recent addition to the Source ADV outfit -- a 2019 Yamaha YZ250X. This is Yamaha’s cross-country version of the YZ250 and is built on top of...
Cost: $15 Difficulty: 1/5 Tools Needed: VHT Ceramic Header Paint Scotch-brite Pads Paint Stripper This two-stroke 1979 Yamaha RD400D Daytona Special is an incredible bike with less than 2500 original miles, but gas coming out of the carb overflow tubes onto the Spec...
Cost: ~$700 Rating: 4.5/5 How much better is this 2017 KTM 500 EXC-f after adding the FMF 4.1 RCT pipe, JD Jetting Power Surge Fueling Tuner, and Euro Intake Boot (intake reed delete) mods? ------ SO MUCH BETTER! Here are the 5 things that drastically improved with...